Home 1.6 LED & SMD's 1.8mm LED 2mm LED 2mm X 4mm LED 3mm LED 5mm LED.htm Ultra Bright LED's 10mm LED's 12 volt LED LED Assemblies I. R. LED Panel Meters Sub Min Toggle Miniature Toggle Pushbuttons Standard Toggle Lighted Toggle Rotary Switch Micro Switch Terminal Blocks Diodes & Rectifiers Relays Hobby Motors Miscellaneous

 

 

 

 

Red, Yellow, Green and Orange LED's work on 2 to volts at 20 ma. Blue and White at 3.5 to 4 volts at 20 ma. A current limiting resistor should be used when lighting LED's in most applications. To find the correct resistor divide your source voltage by .02 then use a resistor equal to that amount or greater, do not use a smaller resistor.

1.6mm Diffused LED's
1.6mm Water Clear      SMD LED's

1.6mm Red 

1.6mm Red Diffused LED's

1.6mm Green

1.6mm Green Diffused LED's

1.6mm Yellow

1.6mm Yellow Diffused LED's

 

1.6mm Amber (Orange)

 
1.6mm Water Clear
1.6mm Diffused      SMD LED's

1.6mm Red  

1.6mm Red Water Clear LED

1.6mm White

1.6mm White Water Clear LED

1.6mm Green

1.6mm Green Water Clear LED

1.6mm Yellow

1.6mm Yellow Water Clear LED

1.6mm Orange (Amber)

1.6mm Orange (Amber) Water Clear LED

1.6mm Blue

1.6mm Blue Water Clear LED

 

1.6mm Warm White

1.6mm Warm White LED's

   
SMD LED's
1.6mm Diffused      1.6mm Water Clear